Australia
Panels

PURMO Ventil Compact

Purmo
Main Page Products Panels PURMO Ventil Compact

Panels - PURMO Ventil Compact

The versatile PURMO Ventil Compact panel radiators with profiled heating panels and convection fins are equipped with side covers and a top grille. Two bottom and four side G½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting.
+

Technical specifications:



Material: high quality, deep-drawing, low-carbon, cold rolled DC01 steel sheet in accordance with PN-EN 10130.
Spacing of vertical water channels: 33,3 mm
Connections: 2 x G ½" bottom, right side connectors (left side- available on request) 
4 x G ½" side connectors
Working pressure: 10 bar
Maximal temperature: 110°C
Test pressure: 13 bar
Colour: RAL 9016 white, other colours from the RAL colour chart are available on request.
Accessories bundled with the radiator: brackets, plug, air vent

Radiators sizes

Type 11

Type 21s

Type 22

Type 33

Radiators dimensions in [mm]:



H - Height (200, 300, 450, 500, 600, 900)
L - Length (400*, 500*, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000, 2300, 2600, 3000)
h - spacing of connectors
* - except for the Ventil Compact model of height 200 mm

Heat outputs and dimensions

Thermal output of the radiators [W] in accordance with PN-EN 442 for the values of parameters 75/65/20 ˚C and 70/55/20˚C.

height [mm] 200 300
length [mm] type CV CV
temp. 21s 22 33 44  11 21s 22

33 
exponent n 1.3340 1.3130 1.3440 1.3470  1.2981 1.2803 1.3094

1.3140 
400 75/65°C - - -

 -

218

304

384

539

 

70/55°C

-

-

-

 -

175

245

308

431

500

75/65°C

-

-

-

 -

273

381

481

674

 

70/55°C

-

-

-

 -

 219 306 385

539
600 75/65°C 347 467 655  836 328 457 577

808
  70/55°C 277 374 521  665 263 367 462

647
700 75/65°C 405 545 764  975 382 533 673

943
  70/55°C 323 436 608  776 307 429 539

754
800 75/65°C 462 622 873  1114 437 609 769

1078
  70/55°C 368 498 695  886 350 490 616

862
900 75/65°C 520 700 982  1254 491 685 865

1212
  70/55°C 415 560 782  998 394 551 693

970
1000 75/65°C 578 778 1091  1393 546 761 961

1347
  70/55°C 461 623 869  1108 438 612 770

1078
1100 75/65°C 636 856 1200  1532 601 837 1057

1482
  70/55°C 507 685 955  1219 482 674 846

1186
1200 75/65°C 694 934 1309  1672 655 913 1153

1616
  70/55°C 553 747 1042  1330 526 735 923

1293
1400 75/65°C 809 1089 1527  1950 764 1065 1345

1886
  70/55°C 645 871 1216  1552 613 857 1077

1509
1600 75/65°C 925 1245 1746  2229 874 1218 1538

2155
  70/55°C 738 996 1390  1774 701 980 1231

1724
1800 75/65°C 1040 1400 1964  2507 983 1370 1730

2425
  70/55°C 829 1120 1563  1995 788 1102 1385

1940
2000 75/65°C 1156 1556 2182  2786 1092 1522 1922

2694
  70/55°C 922 1245 1737  2217 876 1225 1539

2156
2300 75/65°C 1329 1789 2509  3204 1256 1750 2210

3098
  70/55°C 1060 1432 1997  2549 1008 1408 1770

2479
2600 75/65°C 1503 2023 2837  3622 1420 1979 2499

3502
  70/55°C 1199 1619 2258  2882 1139 1592 2001

2802
3000 75/65°C 1734 2334 3273  4179 1638 2283 2883

4041
  70/55°C 1383 1868 2606  3325 1314 1837 2309

3233

height [mm] 450 500
length [mm] type CV CV
temp. 11 21s 22 33 11 21s 22

33 
exponent n 1.3048 1.3008 1.3226 1.3313 1.3070 1.3076 1.3270

1.3371 
400 75/65°C 316 424 539 748 347 462 588

814
  70/55°C 253 340 430 596 278 370 469

649
500 75/65°C 395 530 674 935 434 578 735

1018
  70/55°C 317 425 538 746 348 463 587

811
600 75/65°C 474 636 808 1121 521 694 882

1221
  70/55°C 380 510 646 895 417 556 704

973
700 75/65°C 553 742 943 1308 608 809 1029

1425
  70/55°C 443 595 753 1044 487 648 822

 1135
800 75/65°C 632 848 1078 1495 694 925 1176

1628
  70/55°C 506 680 861 1193 556 741 939

1298
900 75/65°C 711 954 1212 1682 781 1040 1323

1832
  70/55°C 570 765 969 1342 626 833 1056

1460
1000 75/65°C 790 1060 1347 1869 868 1156 1470

2035
  70/55°C 633 850 1076 1491 695 926 1174

1622
1100 75/65°C 869 1166 1482 2056 955 1272 1617

2239
  70/55°C 696 935 1184 1640 765 1019 1291

1784
1200 75/65°C 948 1272 1616 2243 1042 1387 1764

2442
  70/55°C 760 1020 1291 1789 834 1111 1408

1946
1400 75/65°C 1106 1484 1886 2617 1215 1618 2058

2849
  70/55°C 886 1190 1507 2087 973 1296 1643

2271
1600 75/65°C 1264 1696 2155 2990 1389 1850 2352

3256
  70/55°C 1013 1360 1722 2386 1113 1482 1878

2595
1800 75/65°C 1422 1908 2425 3364 1562 2081 2646

3663
  70/55°C 1140 1530 1937 2684 1252 1667 2112

2919
2000 75/65°C 1580 2120 2694 3738 1736 2312 2940

4070
  70/55°C 1266 1700 2152 2982 1391 1852 2347

3244
2300 75/65°C 1817 2438 3098 4299 1996 2659 3381

4681
  70/55°C 1456 1955 2475 3429 1599 2130 2699

3730
2600 75/65°C 2054 2756 3502 4859 2257 3006 3822

5291
  70/55°C 1646 2210 2798 3877 1808 2407 3051

4217
3000 75/65°C 2370 3180 4041 5607 2604 3468 4410

6105
  70/55°C 1899 2550 3229 4473 2086 2778 3521

4866

height [mm] 600 900
length [mm] type CV CV
temp. 11 21s 22 33 11 21s 22

33
exponent n 1.3115 1.3213 1.3358 1.3486 1.3170 1.3390 1.3561

1.3600
400 75/65°C 407 536 684 942 571 744 955

1304
  70/55°C 326 428 545 750 456 593 759

1035
500 75/65°C 509 670 855 1178 714 931 1194

1630
  70/55°C 407 535 681 937 571 741 949

1294
600 75/65°C 611 804 1025 1414 856 1117 1433

1956
  70/55°C 489 643 817 1124 685 890 1138

1553
700 75/65°C 713 938 1196 1649 999 1303 1672

2282
  70/55°C 570 750 954 1312 799 1038 1328

1812
800 75/65°C 814 1072 1367 1885 1142 1489 1910

2608
  70/55°C 652 857 1090 1499 913 1186 1518

2071
900 75/65°C 916 1206 1538 2120 1284 1675 2149

2934
  70/55°C 733 964 1226 1687 1027 1334 1707

2329
1000 75/65°C 1018 1340 1709 2356 1427 1861 2388

3260
  70/55°C 815 1071 1362 1874 1141 1483 1897

2588
1100 75/65°C 1120 1474 1880 2592 1570 2047 2627

3586
  70/55°C 896 1178 1499 2061 1255 1631 2087

2847
1200 75/65°C 1222 1608 2051 2827 1712 2233 2866

3912
  70/55°C 978 1285 1635 2249 1369 1779 2277

3106
1400 75/65°C 1425 1876 2393 3298 1998 2605 3343

4564
  70/55°C 1141 1499 1907 2624 1598 2076 2656

3623
1600 75/65°C 1629 2144 2734 3770 2283 2978 3821

5216
  70/55°C 1304 1713 2180 2999 1826 2372 3035

4141
1800 75/65°C 1832 2412 3076 4241 2569 3350 4298

5868
  70/55°C 1467 1928 2452 3373 2054 2669 3415

4659
2000 75/65°C 2036 2680 3418 4712 2854 3722 4776

6520
  70/55°C 1630 2142 2725 3748 2282 2965 3794

5176
2300 75/65°C 2341 3082 3931 5419 3282 4280 5492

7498
  70/55°C 1874 2463 3133 4310 2625 3410 4363

5953
2600 75/65°C 2647 3484 4443 6126 3710 4839 6209

8476
  70/55°C 2119 2784 3542 4873 2967 3855 4932

6729
3000 75/65°C 3054 4020 5127 7068 4281 5583 7164

9780
  70/55°C 2445 3213 4087 5622 3424 4448 5691

7764

Water capacity and weight

Water volume, weight

height [mm]: 200
300 450
11 21s 22 33 44 11 21s 22 33 11 21s 22 33
weight [kg/m]: - 10,8 13,6 20,3 27,0 9,1 14,0 16,3 24,5 13,9 21,2 24,9 37,4
water volume [l/m]: - 2,5 2,5 3,8 5,0 1,7 3,4 3,4 5,1 2,5 5,0 5,0 7,5
height [mm]: 500 600 900
11 21s 22 33 11 21s 22 33 11 21s 22  33
weight [kg/m]: 15,5 23,5 27,7 41,6 18,7  28,3  33,4  50,2  28,3  42,3 50,7   75,8 
water volume [l/m]: 2,7 5,5 5,5 8,2 3,2  6,6  6,6  9,8  4,5  9,0 9,0   13,3 

Hydraulic characteristics

Starting from January 2011 all the bottom-supplied PURMO panel radiators are equipped with new valve Oventrop inserts with factory preset setpoint ranging from 2 to 6 depending on the size (heat output) of the particular radiator. In order to provide an easy, visual distinction of the applied valve insert, colour coding of regulatory elements of the valve inserts was implemented.

preset setpoint kv [m3/h] colour catalogue no.
2 0,13 white 1651162
3 0,27 black 1651163
4 0,42 green 1651164
5 0,56 blue 1651165
6 0,70 red 1651166

The hydraulic characteristics of these new valve inserts are very similar to the old type (catalogue no. 101 80 80).
Should a need arise, the setpoint of every new valve insert can be changed, just like in the case of the old type inserts.
Total length of the new valve inserts was modifi ed due to an improved sealing, therefore they cannot be used in the radiators manufactured prior to January 2011 and equipped with the old-type of valve inserts.

Old-type and new-type insert

Series of new-type inserts

The value of pressure drop in the radiator depends on the mass flow of water flowing through.:

Example of preset setpoint selection

Given:

heat demand - Qc = 1160 W 
rótemperature diff erence - Δt = 20 K (80/60°C) 
pressure drop - Δp = 6 kPa

Δp = 6000 Pa 
calculation constant - C = 1,163

calculations::

mass flow of water

q = Qc / C * Δt = 1160 / 1,163 * 20 = 50 kg/h

For the flow q = 50 kg/h and the pressure flow 6000 Pa the preset setpoint value 3 is red off the nomogram.

For the flow q = 50 kg/h and the pressure flow 6000 Pa the preset setpoint value 3 is red off the nomogram.

proportionality deviation 2K
preset setpoint 1 2 3 4 5 6 1 2 3 4 5 6
kv [m3/h] 0,05 0,13 0,27 0,42 0,56 0,70

Mass flow of water q [kg/h]

Types of connections

Bottom connection:

This connection method is used with the bottom-supplied radiators. The supply and return line axes are always located, respectively, 80 mm and 30 mm from the side edge of the radiator. Reversed connection will cause a drop in the heat output of over 30%.

Side connection:

The most popular solution allowing for connecting radiators on either the right or the left side. The supply line should be connected to the top and the return line to the bottom connector pipe of the radiator. Reversed connection will cause a drop in the heat output of over 30%.

Flow-through connection:

Recommended for the radiators of length exceeding 2000 mm and also for the radiators of length exceeding four times their height. These connections provide even distribution of temperature over the entire length of the radiator. The supply line should be connected to the left or right connector pipe and the return line should be connected to the opposite, bottom connector pipe. Reversed connection will cause a drop in the heat output of over 30%.

Opposite ends connectione:

With this connection method, the heat output of the radiators will be approximately 10% lower than the rated heat output. This type of connection method is most commonly used with the side-supplied radiators when the heating system piping is distributed in skirting boards above the fl oor. It can also be used with the bottom-supplied radiators after the removal of a thermostatic valve insert.

Intermediate connection:

The bottom-supplied radiators can be connected simultaneously with the side and bottom connections. Possible are intermediate solutions presented at the drawings: side and flow-through. These solutions correspond to the side and flow-through connections described above.

Brackets

Front view

Rear view (only type CV11)

Mounting distances [mm]:

type CV11
L L1 L2
400-1600 117 -
 1800 117 917
 2000 117 1017
 2300 117 1150
 2600 117 1317
 3000 117 1517

Required quantity of floor brackets

height 300 - 600 mm height 900 mm
length [mm] quantity of floor brackets length [mm] quantity of floor brackets
400 - 1800 2 400 - 1200 2
2000 - 2300 3 1400 - 1800 3
2600 - 3000 4 2000 - 3000 4

A set of brackets for the panel radiators with hanging lugs and the height of 300 - 900 mm (Only for type CV11)

A set of the Monclac MCA-D rail brackets for the panel radiators without hanging lugs and the height of 300 - 900 mm - types: CV21s, CV22, CV33

Floor brackets for the 21s, 22, 33 type panel radiators and the height of 300 - 900 mm

Corrective factors

Value of the factor for selecting the heat output of the radiator at temperatures other than 75/65/20 ˚C

t z t p ti air temperature in the heated room [˚C]
[°C] [°C] 5 8 12 16 18 20 22 24
95 90 0,48 0,50 0,54 0,57 0,59 0,61 0,64 0,66
  85 0,50 0,52 0,56 0,60 0,62 0,64 0,67 0,70
  80 0,52 0,55 0,59 0,63 0,65 0,68 0,70 0,73
  75 0,54 0,57 0,61 0,66 0,69 0,72 0,75 0,78
  70 0,57 0,60 0,65 0,70 0,73 0,76 0,79 0,83
90 85 0,52 0,55 0,58 0,63 0,65 0,67 0,70 0,73
  80 0,54 0,57 0,61 0,66 0,68 0,71 0,74 0,77
  75 0,57 0,60 0,64 0,69 0,72 0,75 0,78 0,82
  70 0,59 0,63 0,67 0,73 0,76 0,80 0,83 0,87
  65 0,62 0,66 0,71 0,77 0,81 0,85 0,89 0,93
85 80 0,56 0,59 0,64 0,69 0,72 0,75 0,78 0,81
  75 0,59 0,62 0,67 0,72 0,75 0,79 0,82 0,86
  70 0,62 0,65 0,70 0,77 0,80 0,84 0,88 0,92
  65 0,65 0,69 0,75 0,81 0,85 0,89 0,94 0,99
  60 0,68 0,73 0,79 0,87 0,91 0,96 1,01 1,07
80 75 0,61 0,65 0,70 0,76 0,79 0,83 0,87 0,91
  70 0,64 0,68 0,74 0,81 0,84 0,88 0,93 0,97
  65 0,68 0,72 0,78 0,86 0,90 0,94 0,99 1,05
  60 0,72 0,76 0,83 0,91 0,96 1,01 1,07 1,13
  55 0,76 0,81 0,89 0,98 1,04 1,10 1,16 1,24
75 70 0,67 0,72 0,78 0,85 0,89 0,94 0,98 1,04
  65 0,71 0,75 0,82 0,90 0,95 1,00 1,05 1,12
  60 0,75 0,80 0,88 0,97 1,02 1,08 1,14 1,21
  55 0,80 0,85 0,94 1,04 1,10 1,17 1,24 1,32
  50 0,85 0,91 1,01 1,13 1,20 1,28 1,37 1,47
70 65 0,75 0,79 0,87 0,96 1,01 1,07 1,13 1,19
  60 0,79 0,84 0,93 1,03 1,08 1,15 1,22 1,30
  55 0,84 0,90 0,99 1,11 1,17 1,25 1,33 1,42
  50 0,89 0,96 1,07 1,20 1,28 1,37 1,47 1,58
65 60 0,83 0,89 0,98 1,10 1,16 1,23 1,31 1,40
  55 0,88 0,95 1,05 1,18 1,26 1,34 1,43 1,54
  50 0,94 1,02 1,14 1,29 1,37 1,47 1,59 1,71
60 55 0,94 1,01 1,13 1,27 1,36 1,45 1,56 1,68
  50 1,00 1,08 1,22 1,39 1,48 1,60 1,73 1,87
  45 1,08 1,17 1,33 1,53 1,65 1,78 1,94 2,13
55 50 1,07 1,16 1,31 1,50 1,62 1,75 1,90 2,07
  45 1,15 1,26 1,43 1,66 1,80 1,96 2,15 2,37
  40 1,25 1,37 1,59 1,86 2,03 2,24 2,48 2,78
50 45 1,23 1,36 1,56 1,82 1,98 2,17 2,40 2,67
  40 1,34 1,48 1,73 2,05 2,25 2,50 2,79 3,15
  35 1,47 1,65 1,94 2,36 2,63 2,96 3,38 3,92
45 40 1,45 1,62 1,90 2,28 2,53 2,83 3,19 3,66
  35 1,60 1,80 2,15 2,64 2,96 3,37 3,89 4,58
40 35 1,75 1,98 2,40 3,00 3,41 3,93 4,62 5,54
  30 1,96 2,25 2,79 3,61 4,21 5,01 6,14 7,87

The table has been prepared for n = 1,3

Technical catalogue - Purmo radiators

Technical catalogue - Purmo radiators
PDF: 4.79 MB
Download See online Add to basket

Warranty terms and conditions for PURMO steel panel radiators

  1. PURMO panel radiators are marketed and made available pursuant to the Regulation (EU) of the European Parliament and of the European Council No. 305/2011 laying down harmonized conditions for the marketing of construction products.
  2. Rettig Heating Sp. z o.o. located in Rybnik at Przemysłowa street ( hereinafter referred to as the Guarantor) gives 10 years guarantee ( from date of purchase ) for PURMO panel radiators mounted in water installation of the central heating ,yet not longer than 11 years since the production date given on the radiator.
    10 years guarantee applies to radiators manufactured since 06.03.2007.
  3. The guarantee is valid for radiators mounted in the water installations of the central heating:
    • in closed system with an expansion tank;
    • powered from the heat centre, boiler house or heat pump; 
    • made from black steel / copper or plastic pipes with an antidiffusion barrier; 
    • equipped with local air vents  (no central vent system is allowed) ;
    • used for heating residential areas, office buildings , service stations  or other buildings  that are neither exposed on pernicious corrosive substance activity  nor permanent or temporary moistness of the radiator surface .
    Installation of Purmo panel radiators in small open system installations ( up to 25 kW) is allowed provided the corrosion inhibitors are used.
    During the warranty period the radiators and their components with the faults originated from the manufacturer and reported not later than one month after having been discovered will be repaired or exchanged into new, free of defects devices.
  4. The guarantee is recognized when:
    • there is an evidence of purchase, that is the invoice, 
    • the radiators have been mounted in water central heating systems in compliance with the national technical regulations and standards, 
    • adhering to the requirements of the Guarantor included in „ Terms and conditions of Purmo panel radiators usage”.
  5. Maximal operating pressure in central heating installation for PURMO panel radiators may not exceed 10 bars (6 bars for Vertical radiators ) and the maximal service temperature is 110 °C.
    In high and high-rise buildings a zone distribution system must be applied. The tightness test must be carried out at the experimental pressure equal to working pressure in the installation, adding two bars, yet not lower than four bars. Maximal pressure during the installation tightness test shall be equal to 12 bars ( 8 bars for Vertical radiators). 
  6. The guarantee does not cover radiators mounted:
    • in central heating installation connected to a high temperature heat distribution network through a suction elevator or  pump mixing loop;
    • in swimming pool areas, car wash centers, laundries, slaughterhouses, public toilets, bathrooms or other rooms with high activity of corrosive substances in the air , as well as areas where the radiator is exposed on  permanent or temporary moistness – it does not refer to galvanized radiators , with additional anti-corrosive protection and guarantee for 6 years , yet not longer than 7 years since the production date; 
    • in central heating installations connected with the water- supply system without protective fittings, against backflows; 
    • in central heating installation with water removed  more frequently or for longer periods than advised in exploitation requirements; 
    • in steam installations ;
    • in central heating installations where the water quality rating level has been higher than advised, that is :
    • the total amount of chloride and sulfate ions may not be higher than 150 mg/l ( for installations with copper pipes not higher than  50 mg/l ),
    • oxygen content not higher than 0.1 mg/l,
    • pH water reaction within 7.0 ÷ 9.5,
    • total water hardness not higher than  4.0 mval/l.
  7. The guarantee does not cover damages to the radiator or its parts ( brackets, covers) that are due to improper handling, storage, transport or misuse.
    It refers, in particular, to radiators:
    • stored in the open air before mounting,
    • with mechanical damage,
    • polluted from inside with solid bodies or noxious liquids, 
    • deformed by excessive experimental pressure or static pressure in the installation,deformed due to freezing,
    • with mechanical damage due to an overload as a result of sitting on the radiator.
  8. The radiators must be mounted with the original packaging. The packaging must be left on the radiator even if the central heating installation is activated for heating in buildings during finishing works or for drainage purposes. It is recommended to remove the packaging after accomplishing all finishing works.
    The radiators require periodical cleaning. It is recommended to use only soft and gentle fabrics that can be slightly moistened.  For cleaning the radiators it is not advised to use aggressive or corrosive agents ( e.g. acidic solvents or agents with chlorine). Panel radiators cannot be used for drying wet or dump objects put on the radiator. Claims for damage of varnished surfaces to improper handling or maintenance will not be granted. 
  9. It is forbidden to remove the water from the entire installation or its part and to leave it in this condition. It also refers to new installations with the tightness test. If there is a need to remove the water , e.g. due to renovation or maintenance works, the water must be removed only from the given part. After accomplishing all works the installation must immediately be filled with water. Quantity of water used for the filling or filling up process must be monitored, e.g. by a watermeter.
  10. The guarantee of our product is granted provided it has not been repaired or modified by a buyer or third party without Guarantor’s approval. 
  11. Occurrence of faults within the warranty period is followed by a claim procedure by notifying the Retailer about the damage in a special claim form including the origin and details of damage. The retailer accepts the claim form and forwards it to the Guarantor via registered letter, fax or e-mail within 24 hours since it has been accepted. In case of incomplete data , the form shall be returned in order to be completed. The invoice or its copy shall be attached with the form. In specific cases the Guarantor may request a photo documentation of the claimed product. The Guarantor is obliged to reply for the complaint in writing within 14 days since a completed form was accepted. 
  12. In order to recognize the claim a visual inspection is performed by the Guarantor in the mounting area or other area determined by the Guarantor. The original packaging used for delivery must be kept for the inspection in case of a damage with mechanical origin. If the claim has been recognized , the Guarantor is obliged to repair or replace the parts found to be defective due to improper manufacturing or material defects or exchange the radiator into a new device that is free of defects. In specific cases,  ( e.g. when the product needs to be sent from abroad) the Guarantor has the right to extend the deadline to recognize the claim that is normally defined to be 14 days.
    In case of damages that do not affect the radiator functionality, a discount may also be offered.
    In case of the claim regarding a product, manufacturing of which has been ceased , the Guarantor will offer an equivalent with similar  parameters or a money back guarantee at the date of the purchase. The Guarantor does not deliver an alternative device for the time of claim recognition process.
  13. The Guarantor has the right to select the method of claim settlement.
    In case the claim is recognized in the form of exchange, all mounting shall be delivered by an authorized Purmo service centre. In case any difficulties occur when mounting the exchanged radiator, e.g. lack of valve for separating the radiator from installation, the service centre may refuse to disassemble or mount the new radiator. As a consequence, the warranty claim is recognized as exercised by the Guarantor.
  14. The warranty period shall be extended due to reparation time calculated since the date of delivery to the Guarantor to the reparation date . In case of exchange a new warranty period is granted.
  15. The Guarantor reserves the right to make modifications to his products without prior notice unless they refer to any significant technical details affecting the process of selection. 
  16. The warranty terms on goods sold do not exclude , limit or suspend  rights of the buyers when the product fails to comply with the contract in accordance with the Act of 27.07. 2002 on specific conditions of consumer sale and amendings of  the Civil Code. (Journal of Laws  2002  no. 141, point 1176).
  17. Warranty conditions are valid as stated since  01.07.2013 .

Gallery