PURMO International
System Elements

Tools

To be able to make CLEVERFIT connections, you need professional tools. The pressing tools are crucial; however, calibrators and cutters are important as well. The pressing tools being part of the Purmo CLEVERFIT system are robust and reliable machines made by renowned German producers.

Mini-pressing tool

In the Purmo CLEVERFIT system we use, e.g., a battery-powered mini-pressing tool. The tool has been designed to be user-friendly for installers. First of all it’s very light and has ergonomic shape. Moreover, it is equipped with a rotating head and a LED diode, providing additional light. The whole pressing process takes several seconds at most. The tool has a built-in microprocessor to monitor its operation. It can detect to low pressing force and notifies the user when the tool needs to be sent for service. The tool is delivered in a set with special mini jaws (16, 20, 26 and 32 mm) of TH conthur, a Li-Ion battery and charger, as well as a manual in English and a toolbox.

Diameters range 16 - 32 mm
Ambient temperatures -10 oC - +40 oC
Piston force min. 15 kN
Battery Voltage-18 V Capacity - 1,3 Ah Battery type: Li-Ion
Press cycles ca. 150 cycles
Dimmensions 377 x 116 x 75 mm
Weight without battery 1,7 kg

REMS pressing tools

For large installations,, Purmo recommends Rems pressing tools. They can be used for 16-63 mm connections. Their compact structure, small size and smooth shape make them a good solution on every construction site. They are available in the 230 V powered version or battery-powered version. They are delivered in a metal toolbox.

Diameters range 16 - 63 mm
Ambient temperatures -10 oC - +60 oC
Piston force 32 kN
Battery Voltage-14,4V Capacity- 3,2 Ah Battery type: Li-Ion
Press cycles ca. 150 cykli
Dimmensions 338x298x85 mm
Weight without battery 3,8 kg

REMS pressing tools

For large installations,, Purmo recommends Rems pressing tools. They can be used for 16-63 mm connections. Their compact structure, small size and smooth shape make them a good solution on every construction site. They are available in the 230 V powered version or battery-powered version. They are delivered in a metal toolbox.

Diameters range 16 - 63 mm
Ambient temperatures -10 oC - +60 oC
Longitudinal force 32kN
Power 450 W
Dimmensions 430x118x85 mm
Weight 4,7 kg

There is a manual pressing tool for 16-26 mm diameter connections as an alternative solution.. It is very light and handy, which makes it suitable for in the most inaccessible places.

Cutters

The first step is cutting pipes to the appropriate length. Cutting is performed with use of cutters or disc cutters. They assure cutting plane perpendicularity to the pipe longitudinal axis. It is not allowed to use saws or other cutting tools, creating material chips, which are difficult or even impossible to remove from the system.

Calibrator

It would be impossible to make correct CLEVERFIT connections without calibration. Purmo offers a unique pipe calibrator. It restores the pipe’s circular shape and deburr its edges, so the pipe can smoothly slide into the fitting.

Pump for pressure test

According to technical requirements, pressure test must be done after the installation is assembled. Purmo offers manual pump for water pressure test.