Towel warmers - Kea

Kea is a real eye-catcher, with its shapely heater pipes on both sides. As a bonus, it's ideally
suited for drying out laundry.  

Information :

Height(mm) 1022 – 1262 – 1502 - 1742
Length (mm) 600 - 750 - 900
Connections 4 x 1/2" IG and 1 x1/4" IG connections
Installation 4 welded-on hanging strips for 4 adjustable wall brackets.
Accessories Airvent, two plugs, wall-mounting set
Packaging The radiators are factory packed in heat shrinkable film. The radiators corners are protected with the plastic covering.
Guarantee 10 Years

 

 

     
Type Length Height Centre-to-centre
connections
Weight Volume 75/65/20 BTU
KEA1006 600 1022 99 10,60 4,40 499 1703
KEA1306 600 1262 99 13,30 5,30 613 2092
KEA1307 750 1262 99 15,70 5,70 739 2522
KEA1506 600 1502 99 16,00 6,10 724 2471
KEA1507 750 1502 99 18,70 6,70 870 2969
KEA1509 900 1502 99 21,60 7,60 1030 3515
KEA1807 750 1742 99 21,70 7,70 1008 3440
KEA1809 900 1742 99 24,90 9,20 1194 4075
      

 

A = centre - to - centre connections
B = height
C = length

Corrective ratios

°C Factor °F
40°C 0.75 72°F
45°C 0.88 81°F
50°C 1 90°F
55°C 1.13 99°F
60°C 1.25 108°F
65°C 1.39 117°F
70°C 1.51 126°F
Full assembly instructions are provided with product.

 

As for accessoires, towel rails, towel rings, bath towel rails, laundry racks and a glass-holder are all available
Each PURMO is guaranteed for ten years from the date of installation against defects caused by faulty materials or manufacture. We replace the defective product with a similar or technically corresponding convector.

The guarantee does not cover damages that are due to faulty storage and handling at delivery or installation, nor damages that are due to faulty use of the convector, such as inside and outside rust, use of corrosive substances, too high pressure or damage due to freezing.

This guarantee does not cover incidental damages caused by the Purmo product, costs for change of product, production loss of the customer, loss of profit or other indirect costs.

In case of a guarantee claim the buyer must contact the seller and present some kind of evidence of purchase of the product, for example, order confirmation or delivery note.

The defective product always has to be sent back to Purmo for inspection within one month from the date of complaint, if not otherwise agreed upon.