Towel warmers - Andros M

Modern comfort. Fully integrated with central connector valve and thermostat head.

PrevNext

Information :

Height (mm) 776 – 1154 - 1742
Length (mm) 595 - 746
Connections 2 x diameter 1/2" (15/21)
Installation 4 welded-on hanging strips for 4 wall brackets
Accessories 4 brackets, 1 airvent 1/8”, 2 blind stoppers
Packaging The radiators are factory packed in heat shrinkable film. The radiators corners are protected with the plastic covering.
Guarantee 10 Years
                             
    AN0608M                        AN0612M                        AN0812M



            
      AN0617M                             AN0817M    
Type Length Height Centre-to-centre
connections		 Weight Volume 75/65/20 BTU
AN0608M 595 776 50 9,00 4,30 461 1573
AN0612M 595 1154 50 13,30 6,50 689 2352
AN0812M 746 1154 50 15,40 7,60 823 2809
AN0617M 595 1742 50 20,10 10,00 1051 3587
AN0817M 746 1742 50 23,40 11,80 1275 4352

 

                 

Top View


A =  centre-to-centre connection
B = Height
C =  Length
D =  Centre-to-centre connection Hori
X = Centre-to-centre connection Verti

 D  X
 AN0608M  525  546
 AN0612M   525  924
 AN0812M  676  676
 AN0617M  525  1512
 AN0817M   676 1512 

                   

Corrective ratios

°C Factor °F
40°C 0.75 72°F
45°C 0.88 81°F
50°C 1 90°F
55°C 1.13 99°F
60°C 1.25 108°F
65°C 1.39 117°F
70°C 1.51 126°F
Full assembly instructions are provided with product.
At the moment, there are no accessoires available for the Andros
Each PURMO is guaranteed for ten years from the date of installation against defects caused by faulty materials or manufacture. We replace the defective product with a similar or technically corresponding convector.

The guarantee does not cover damages that are due to faulty storage and handling at delivery or installation, nor damages that are due to faulty use of the convector, such as inside and outside rust, use of corrosive substances, too high pressure or damage due to freezing.

This guarantee does not cover incidental damages caused by the Purmo product, costs for change of product, production loss of the customer, loss of profit or other indirect costs.

In case of a guarantee claim the buyer must contact the seller and present some kind of evidence of purchase of the product, for example, order confirmation or delivery note.

The defective product always has to be sent back to Purmo for inspection within one month from the date of complaint, if not otherwise agreed upon.